 |
 |
 |
 |
Mounted ploughs MULTI-MASTER 182
A new mounted plough in 5, 6 and 7 furrows with multiple working widths.
The top of the range for ploughing professionals |
|
| The Multi-Master 182 meets the demands of the ploughing professional: |
 |
Strength and long life with the OPTIDRIVE suspension headstock and the MASTER range concept, |
|
Safety and comfort with complete plough leg protection in either non-stop hydraulic (NSH) auto-reset or traction bolt system, |
|
Highly adaptable with high work rates: ease and speed of set-up into the work/transport position, ease of adjustments, wide working widths out to a total of 3.55m in one pass. |
|
 |
|
Drilled out turnover shaft in special heat-treated steel.
The 140mm diameter drilled out turnover shaft is assembled with conical roller bearings and allows the passage of hydraulic pipes through the centre of the headstock. This prevents the pipes from twisting during turnover and provides extra protection from possible damage. |
|
OL Version
The on-land range is designed for trac- to KUHN
tors fitted with wide-wheels, tracks and dual wheels. The large dimensioned parallelogram system enables this plough range to adapt to tractors with an overall width of up to 3.20m whilst at the same time maintaining the possibility to plough in-furrow. Furrow compaction can be avoided by ploughing on-land, a special concern with the tractor sizes used with this range of ploughs. |
 |
|
Working width adjustments on the Multi-Master 182
Multi-Master : 14” - 16” - 18” and 20”
by moving bolts to the required width
setting hole and by moving the spacers. |
 |
|
Depth Wheel: position adjustable along the beam
The 690mm diameter depth wheel has a vertical pivot allowing the wheel to automatically follow
all changes in working width. |
 |
|
Mounted ploughs VARI-MASTER 182
A 6 furrow mounted plough, variable width with Non-Stop hydraulic autoreset:
The top of the range for ploughing professionals |
|
The Vari-Master 182 meets the
demands of the ploughing professional: |
 |
|
Strength and long life with the OPTIDRIVE suspension headstock
and the MASTER range concept. |
|
Complete plough leg protection with the non-stop hydraulic autoreset system and transport wheel with suspension. |
|
|
Highly adaptable with high work rates : ease and speed of set-up into the work/transport position, ease of adjustments, variable working width to adapt to all work conditions. |
|
Forged and heat treated one piece main link
Designed for strength and long life the main link is assembled with steel bushes and the pins locked to prevent rotation. |
|
| Useful advantages of having a variable width plough |
Working width adjustments on
the Vari-Master 180
12’’ to 19’’ in 96cm point to point. The working width is changed hydraulically from the tractor cab. The correction of the front furrow and plough aligning settings
are carried out automatically as the width changes. For plough turnover the ploughs bodies fold up automatically to their narrowest width for the maximum possible ground clearance. After turnover
the plough returns to the memorised
working width. |
|
Instant adaptation to available traction. |
|
Time savings and reduced fuel consumption |
|
Holding of a good working speed on steep slopes. |
|
Ability to cope with different levels of trash. |
|
Neat finish to the field. |
|
Avoiding obstacles and tidying up of difficult unploughed areas. |
|
 |
|
| |
