 |
 |
 |
 |
Control fertilizer application to control production costs. As well as providing the "Right Dose", lateral regularity is the second most important parameter if you want to get the most out of your fertilizer.
Lateral regularity is seen in the distribution diagram. The ideal is the triangular diagram:
|
|
 |
Double recrossing reduces the effect of wind and changes in the fertilizer quality; |
 |
Easy regularity adjustment; |
 |
It reduces considerably the effects of slopes. |
This lateral regularity must be constant, no matter the application rate or forward speed.
Application rate proportional to the forward speed (D.P.A.E.) or application rate adjustment by GPS must not compromise the quality of fertilizer distribution. |
|
| QUANTRON E: more than just a control box! |
 |
The QUANTRON E box is used with a machine equipped with D.P.A.E. (Electronic device controlling application rate proportional to forward speed) or built-in weighing system (AXIS W).
With D.P.A.E.: run the flow rate test with your fingertips. Quantron E changes the openings according to forward speed to ensure that your application rate is respected.
|
| With weighing system: The control box continuously indicates the fertilizer quantity in the hopper. It controls outlet openings during work according to the programmed application rate and the quantity of fertilizer remaining in the hopper; there is no need to run a fixed station flow rate test. |
|
Your spreading assistant
During spreading, quantities and yields are managed with great accuracy: |
 |
Simple application rate programming, |
 |
Separate control of left and right outlets for half-widths, |
 |
Simultaneous or separate application rate adjustment per side via a freely adjustable setting, |
 |
Work counter for 200 fields (surface, date, application rate, fertilizer type), |
 |
Integrated spreading charts with possibility to save “personal” fertilizers. |
|
Move from one tractor to another
It can be used on several tractors (CUMA, ETA): |
 |
Store the speed signal for 4 different tractors, each tractor can be named; |
 |
Use the speed signal for your tractor via the ISO 11786 plug or the speed sensor supplied with the machine, or connect a GPS speed sensor (e.g. Dickey John I-SPEED). Useful for tractors of machinery rings or contractors. |
Compatible for GPS or N-SENSOR application rate adjustment
With an RS232 serial link, your spreading plan is followed to the letter.
Benefit from your ground's best potential while saving your quantities of fertilizer.
The “Right Dose” in the right place! |
|
To facilitate traceability
QUANTRON E is pre-equipped to transfer the work done to a PC or a PALM. You can also transfer the spreading charts for a new type of
fertilizer to the QUANTRON E.
Flow rate check and fast emptying
Check flow rate from your AXIS® without weighing in just a few minutes. At a fixed station, you obtain the best precision.
The small funnel channels the fertilizer into a container. |
 |
|
 |
Fertilizer spreaders AXIS® 20.1
For simplicity and precision over 12 to 28 m |
|
The design of the AXIS® 20.1 provides the latest innovations while ensuring application rate accuracy, quality of fertilizer distribution and easy adjustment. Its modular capacity from 1000 to 2300 litres and compact design make it ideal for use on medium-sized tractors. Its spreading power is such that it can work at widths of 12 to 28 m.
All stainless steel
Using 100% stainless steel components: integral body, hopper bases, outlets, cylinder rods, and attachment hardware ensure increased service life.
Easy to attach to the tractor
The 2 coupling heights make it easy to attach to tractors of different sizes for filling (machine on the ground) or late top spreading. |
 |
|
 |
Fertilizer spreaders AXIS® 30.1- 40.1
For higher “flow rate” from 12 to 42 m
AXIS® 30.1 and 40.1 are characterized by their modular capacity from 1200 to 3000 litres and working widths of 12 to 42 m. A machine designed for accurate distribution with the highest work yields: ideal for reducing spreading time |
|
| Extra accuracy |
|
|
 |
Valve guide
The fertilizer drop point onto the disc determines the working width and distribution. To increase its accuracy, the valve guide follows the flow of fertilizer until it is taken up by the blades, without spilling granulate. An exclusivity! |
 |
AIRFIN® deflectors
They prevent flow variations due to fertilizer aspiration. The turbulence generated by the rotating disc has no effect on the flow of fertilizer. |
|
|
|
 |
Fertilizer spreaders AXIS® 40.1 W
Integral continuous weighing from 12 to 42 m
AXIS® 40.1 W has a built-in weighing system providing automatic, continuous regulation as you work.
Every farmer notices a variation in fertilizer flow rate due to external hygrometry or climatic conditions during spreading operations or due to the method of storing the fertilizer.
This weighing system will automatically adjust outlet openings without driver intervention, to respect the application rate to be spread.
Result: non-negligible saving of fertilizer! |
|
 |
Optimal integration of the weighing system
The original, patented design of the weighing system consists of a strong hitch frame fitted with two weigh cells with a capacity of 10 tonnes each, and in the upper part, a link rod connected to the machine frame. |
|
 |
Benefits of this clever coupling system
Use of 2 weigh cells: more accurate even on slopes;
A payload of 3000 kg.
No deterioration in coupling height: easy to load;
2 coupling heights available: adapts to any size of tractor; |
Slightly different unloaded weight (plus 35 kg);
Good clearance for passage of the transmission: no interference with the coupling frame. |
 |
Precision and comfort
Weighing precision is +/- 1%. It therefore ensures an accurate definition of the desired application rate. |
|
 |
Constant regulation
Check the load in the tank and spread: the QUANTRON E control box automatically calculates the outlet openings in about 15 seconds on the first spreading then constantly for the following operations. The "Right Dose" from the first few metres of spreading! With its wide screen it is easy to check visually: |
|
 |
The application rate |
 |
Outlet openings |
 |
Forward speed |
 |
Half-widths |
 |
Residual amount of fertilizer in the hopper |
 |
Application rate adjustment. |
|
 |
Fast disc attachment
Each pallet can be removed in just a few seconds without tools. It is easy to empty the residual product at the end of the job. |
|
See the level of fertilizer
2 openings bringing light inside the hopper, the level of fertilizer is easily visible through the hopper windows! |
|
 |
|