 |
 |
 |
 |
Simple to use, accurate spreading, easy and minimum maintenance...
The MDS 735 – 935 Fertiliser spreaders are intended for medium sized livestock, mixed crop and cereal farms. The design is based on the following requirements:
|
|
|
 |
Disc guard
A large stainless guard envelops the spreading discs and provides effective protection for the painted areas of the frame and the hopper. An added benefit for the service life of the machine.
Robust and reliable
The gearbox housing is the heart of the machine. Drive components are housed in a robust cast casing. For your peace of mind: the first oil change is required after 10 years’ service.
Slow rotating agitator
The slow rotation speed (180 RPM) prevents grinding of the fertiliser, even during spreading to one side only. The fertiliser is delivered in a consistent flow through the outlets and the stainless steel base. |
|
 |
MDS 935 R2: with hydraulic control
This model has an integral hydraulic control with two cylinders. The flow rate is set each side individually with a very large infinitely adjustable scale. Two hydraulic cylinders control each half of the spread allowing individually control of spreading to the left or right. |
|
 |
MDS 735 M – MDS 935 M
These two economical models have a scale located at the front of the machine. Opening / closing is manual but can be fitted with a hydraulic control as optional equipment. MDS 935 M not available in the UK.
|
|
| |
Capacity (Approx) (l) |
Filling height (cm) |
Filling width (cm/ft) |
Hopper width (cm/ft) |
Minimum depending on tractor |
Placed horizontally on the ground |
| MDS 735 |
700 |
89 / 2’11” |
93 / 3’1” |
180 / 5’11” |
190 / 6’3” |
| MDS 900 |
900 |
97 / 3’2” |
101 / 3’4” |
180 / 5’11” |
190 / 6’3” |
| Width extension fitted |
M 423 |
+ 400 l |
+ 8 cm (0'3") |
180 / 5’11” |
190 / 6’3” |
| M 620 |
+ 600 l |
+ 30 cm (0'12") |
180 / 5’11” |
190 / 6’3” |
| M 623 |
+ 600 l |
+ 16 cm (0'6") |
230 / 7 ’7” |
240 / 7’10” |
| M 423 |
+ 900 l |
+ 26 cm (0'10") |
230 / 7 ’7” |
240 / 7’10” |
|
|
